The GMAT quant section has many faces – there are a number of content areas, and it is best to try to master as many of them as you can before test day. It is important, however, that you not compartmentalize too much. In many of the harder questions in fact, two or more topics often show up together. You can easily find quadratics in a consecutive integer question, coordinate geometry in a probability question, number properties in a function question, for example. One common intersection of two topics that I find surprises many students is that of geometry and algebra. Many people expect a geometry question to be about marking up diagrams with values or tick marks to show equality and/or applying properties and formulas to calculate or solve. While these are no doubt important skill sets in geometry, don’t forget to pull out one of the most important skills from your  GMAT tool bag – the almighty variable! x’s and y’s have a welcomed home in many a geometry question, though you might find that you are the one who has to take the initiative to put them there!

Take a look at this data sufficiency question from GMATPrep®

In the figure shown, the measure of PRS is how many degrees greater than the measure of PQR?

(1) The measure of QPR is 30 degrees.

(2) The sum of the measures of  PQR and PRQ is 150 degrees.

How did you do? Don’t feel bad if you’re a little lost on this one. This is a difficult question, though you’ll see that with the right moves it is quite doable. At the end of this discussion, you’ll even see how you could put up a good guess on this one.

As is so often the case in a data sufficiency question, the right moves here start with the stem – in rephrasing the question. Unfortunately the stem doesn’t appear to provide us with a lot of given information. As indicated in the picture, you have a 90 degree angle at  PQR and that seems like all that you are given, but it’s not! There are some other inherent RELATIONSHIPS, ones that are implied by the picture. For example PRS and PRQ sum to 180 degrees. The problem, however, is how do you CAPTURE THOSE RELATIONSHIPS? The answer is simple – you capture those relationships the way you always capture relationships in math when the relationship is between two unknown quantities – you use variables!

But where should you put the variables and how many variables should you use?  This last question is one that you’ll likely find yourself pondering  a number of times on the GMAT. Some believe the answer to be a matter of taste. My thoughts are always use as few variables as possible. If you can capture all of the relationships that you want to capture with one variable, great. If you need two variables, so be it. The use of three or more variables would be rather uncommon in a geometry question, though you could easily see that in a word problem.  Keep one thing in mind when assigning variables: the more variables you use, usually the more equations you will need to write in order to solve.

As for the first question above about where to place the variables, you can take a closer look in this question at what they are asking and use that as a guide. They ask for the   (degree) difference between PRS and PQR. Since PRS is in the question, start by labeling PRS as x. Since PRS and  PRQ sum to 180 degrees, you can also label PRQ as (180 – x) and  RPS as (180 – x – 90) or (90 – x).

Can you continue to label the other angles in triangle PRQ in terms of x or is it now time to place a second variable, y? Since you still have two other unknown quantities in that triangle, it’s in fact time for that y. The logical place of where to put it is on  PQR since that is also part of the actual question. The temptation is to stop there – DON’T! Continue to label the final angle of the triangle, QPR, using your newfound companions, x and y. QPR can be labeled as [180 – y – (180 – x)] or (x – y). Now all of the angles in the triangle are labeled and you are poised and ready to craft an algebraic equation/expression to capture any other relationships that might come your way.

Before you rush off to the statements, however, there is one last step. Formulate what the question is really asking in terms of x and y. The question rephrases to “What is the value of x – y?”

Now you can finally head to the statements. Oh the joy of a fully dissected data sufficiency stem – 90% of the work has already been done!

Statement (1) tells you that the measure of QPR is 30 degrees. Using your x – y expression from the newly labeled diagram as the value of  QPR, you can jot down the equation x – y = 30. Mission accomplished! The statement is sufficient to answer the question “what is the value of x – y?”

Statement (2) indirectly provides the same information as statement (1). If the two other angles of triangle PQR sum to 150 degrees, then QPR is 30 degrees, so the statement is sufficient as well. If you somehow missed this inference and instead directly pulled from the diagram y + (180 – x) and set that equal to 150, you’d come to the same conclusion. Either way the algebra saves the day!

The answer to the question is D, EACH statement ALONE is sufficient to answer the question asked.

NOTE here that from a strategic guessing point of view, noticing that statements (1) and (2) essentially provide the same information allows you to eliminate answer choices A, B and C: A and B because how could it be one and not the other if they are the same, and C because there is nothing gained by combining them if they provide exactly the same information.

The takeaways from this question are as follows:

(1) When a geometry question has you staring at the diagram, uncertain of how to proceed in marking things up or capturing relationships that you know exist – use variables! Those variables will help you move through the relationships just as actual values would.

(2) In data sufficiency geometry questions, when possible represent the question in algebraic form so the target becomes clear and so that the rules of algebra are there to help you assess sufficiency.

(3) Once you have assigned a variable, continue to label as much of the diagram in terms of that variable. If you need a second variable to fully label the diagram, use it. If you can get away with just one variable and still accomplish the mission, do so.

Most GMAT test-takers know that they need to develop clear strategies when it comes to different types of word problems, and most of those involve either muscling your way through the problem with some kind of practical approach (picking numbers, visualizing, back-solving, logical reasoning) or writing out algebraic equations and solving.  There are of course pluses and minuses to all of the approaches and those need to be weighed by each person on an individual basis. What few realize, however, is that geometry questions can also demonstrate that level of complexity and thus can often also be solved with the tools of algebra. When actual values are few and far between, don’t hesitate to pull out an “x” (and possibly also a “y”) and see what kind of equations/expressions you can cook up.

For more practice in “algebrating” a geometry question, please see OG 13^th DS 79 and Quant Supplement 2^nd editions PS 157, 162 and DS 60, 114 and 123.